Welcome! Log In Create A New Profile

Advanced

possible to add beef to top surface?

Posted by syncra 
possible to add beef to top surface?
March 14, 2012 06:27AM
Did anybody feel the need to add some more material in the last top layer of flat objects?

sometimes happens to me to have the final top filling not perfectly filled. Maybe it's because of the low internal density (0.10-0.15)? In any case it would be fine if I could just push some more material in the last layer only.

Any advise?
Thanks
Re: possible to add beef to top surface?
March 14, 2012 07:34AM
How many solid layers do you have after the infill? I find it takes three to get a solid top when w/t is 1.5, more if it is higher.


[www.hydraraptor.blogspot.com]
Re: possible to add beef to top surface?
March 14, 2012 07:39AM
I use always 3 layers, both on side walls and top and bottom. What do you mean with w/t?
Thanks
Syncra
Re: possible to add beef to top surface?
March 14, 2012 07:50AM
Ok got it, sorry! width over thickness - I keep this at 1.3 - is this the problem? Saving material... grinning smiley
I moved it to 1.5 now, see if that was the problem.
Sorry, only registered users may post in this forum.

Click here to login