Slow Print Speed With 0.2mm Nozzle January 18, 2016 12:16PM |
Registered: 8 years ago Posts: 9 |
Re: Slow Print Speed With 0.2mm Nozzle January 19, 2016 02:35AM |
Registered: 10 years ago Posts: 580 |
Re: Slow Print Speed With 0.2mm Nozzle January 19, 2016 12:34PM |
Registered: 8 years ago Posts: 9 |
Quote
Paul Wanamaker
That is pretty slow. I will ask a few questions to kick it off.
What temperature?
What layer height?
What extrusion width?
What slicer?
Can you link to a gcode file?
Photo of extruder?
If you watch the extruder carefully when trying to go faster- is the filament slipping or extruder slipping backwards?
What hot end?
Did you set extruder current?
Is extruder motor getting hot?
Is driver very hot?
The reason for the questions is that a larger nozzle may not help if the problem is elsewhere.
Re: Slow Print Speed With 0.2mm Nozzle January 19, 2016 01:21PM |
Registered: 10 years ago Posts: 580 |
Re: Slow Print Speed With 0.2mm Nozzle January 19, 2016 02:11PM |
Registered: 8 years ago Posts: 9 |
Re: Slow Print Speed With 0.2mm Nozzle January 20, 2016 11:15AM |
Registered: 8 years ago Posts: 9 |
Re: Slow Print Speed With 0.2mm Nozzle January 20, 2016 02:42PM |
Registered: 10 years ago Posts: 580 |
Re: Slow Print Speed With 0.2mm Nozzle January 25, 2016 02:30PM |
Registered: 8 years ago Posts: 9 |
Re: Slow Print Speed With 0.2mm Nozzle January 25, 2016 04:59PM |
Registered: 10 years ago Posts: 580 |