Hey guys im new to this forum and am mainly here as I have an issue I am trying to solve for my printer I have. Its a HIC i3 Prusa/mendel variant printer. I do not know exactly what kind of board it runs on or how I can program this. I was wondering if anyone knew as I have an annoying issue. The printers default settings are off for the X and Y steps/mm. They are set at 80 steps/mm, but after much calibrating and printing of parts it actually should be x: 73.71 steps/mm and y: 74.00 steps/mm. Otherwise the parts I print come out much larger (about 10% larger) than they should and thats a big no no for what I want to print out. AND since the computer doesn't seem to memorize my adjustments to the settings I do on the printer through the LCD everytime I unplug it, it resets itself and I find myself twisting and turning to get the settings back to where they should. This is very annoying and was wondering if anyone knew how to program the motherboard or have it run a script. I have tried everything, and I cant even get the printer to pop up on my computer, when I plug it in it does not show up as anything (i.e. like a device or memory card etc) Please help!