Welcome! Log In Create A New Profile

Aworldnet A600 - only fun working

Posted by julo

julo

Aworldnet A600 - only fun working
January 13, 2015 06:36AM

Registered: 9 years ago
Posts: 5

Hi,
I build printer, install drivers,
but Repetier-Host after conect do not known printer name, firmware firmware web page, ...

I think firmware in arduino is wrong

help me, thanks

Reply Quote

davy999

Re: Aworldnet A600 - only fun working
January 15, 2015 04:45PM

Registered: 9 years ago
Posts: 25

Hi Julo

Is the baud rate setting correct?

Details should be in the instructions.

Dave

Reply Quote

julo

Re: Aworldnet A600 - only fun working
January 16, 2015 03:44AM

Registered: 9 years ago
Posts: 5

Hi,
Baud rate is OK,
I set Baud rate as in instructions, and so for FTDI driver.

Julo

Reply Quote

rhmorrison

Re: Aworldnet A600 - only fun working
January 16, 2015 03:57AM

Registered: 14 years ago
Posts: 3,742

You can't set a baudrate in the FTDI driver!
In your FIRMWARE and HOST program is where you have to set the baudrate.

Bob Morrison
Wörth am Rhein, Germany
"Luke, use the source!"
BLOG - PHOTOS - Thingiverse

Reply Quote

julo

Re: Aworldnet A600 - only fun working
January 20, 2015 04:17AM

Registered: 9 years ago
Posts: 5

Hi,
After Instal FTDI driver, in Control panel exist Com port (com4).
This port has Driver FTDI and baud rate 9600.
I change the baud rate to 115200 too.

julo

Reply Quote

davy999

Re: Aworldnet A600 - only fun working
January 22, 2015 03:58AM

Registered: 9 years ago
Posts: 25

If you are using Repetier to control the printer, you need to look in the printer settings of Repetier, that is where you set the baud rate of the printer to 115200.

Dave