Extruder dimensions
Posted by kryptomaniac
|
Extruder dimensions January 12, 2015 01:45PM |
Hi! I need the dimensions for the Geared Wades extruder please.
The length and breadth and heights for the extruder block and idler
And the radius amd diameter for the big and small gears
I can make the slots and holes according to the bearing and screw sizes. I really need the length and radius measures.
I want to make them with thin wood sheets as i do not have any access to 3d printers. Thank you.
Here's a picture for what i mean to say.
Edited 2 time(s). Last edit at 01/12/2015 01:48PM by kryptomaniac.
The length and breadth and heights for the extruder block and idler
And the radius amd diameter for the big and small gears
I can make the slots and holes according to the bearing and screw sizes. I really need the length and radius measures.
I want to make them with thin wood sheets as i do not have any access to 3d printers. Thank you.
Here's a picture for what i mean to say.
Edited 2 time(s). Last edit at 01/12/2015 01:48PM by kryptomaniac.
Sorry, only registered users may post in this forum.