Hi all,
during the last weeks I've successfully built a Raprap Prusa i3. The first prints were done successfully.
However, something seems to be wrong: If I'm manually moving the x carriage e.g. +10, the y carriage is moved as well.
That happens ONLY with the first command, directly after connecting to the printer. Subsequent commands are working as expected
(i.e. x- or y-axis only).
It happens with x- and y axis related commands and if I remember correctly also with the extruder.
(i.e. manually extruding as first step after connecting also moves x- and y- motors additionally.)
The z motors are not moving.
I've recorded a short video of the issue:
[
www.dropbox.com]
Any idea what's causing the issue and how to get rid of it?
Meanwhile I've noticed that my configuration was not 100% OK. The x endstop is at max position but I've treated that as min.
Therefore my prints were mirrored. That is already fixed.
Thanks for your help!
WP
Edited 1 time(s). Last edit at 01/04/2015 09:20AM by WinterPrinter.
Reprap Prusa i3 - wooden frame - Ramps 1.4