Just starting a Prusa I3

Hello I am just in the planning stage of building a Prusa I3 box frame and would like to know if I have everything I will need in my list.

the list is an open office calc document if you need me to post it in plain text let me know.

Thanks,
Bunnyoken

LM8UU bearings, another bearing size is missing (you need for extruder and axis)
endstops
motor drivers
power supply
printing surface (glass?)
few fans
and of course a filament

Quote
EEstudent
LM8UU bearings, another bearing size is missing (you need for extruder and axis)
endstops
motor drivers
power supply
printing surface (glass?)
few fans
and of course a filament

Where are the LM8UU bearings used because the only bearing I see on the build guide are 608 and 608zz
will these endstops work?
it shows some in the photo of the ramps board but if they are not included then i will just order them off of ebay
for power supplies I was going to use one of the 575watt psu's I have laying around
I was going to use the glass off of an extra photo frame i have
and like the psu's i have plenty of these laying around

More details:
[github.com]
[github.com]
[github.com]
[78.47.92.212]
take a looks on this pages especially the configuration file and i3.tdoc

Make sure you use the github values for the Y axis otherwise your be scratching your head trying to work out why yours doesn't match the guides.
It annoyed me a lot more then it should

Edited 1 time(s). Last edit at 03/27/2014 07:07AM by JoeDaStudd.

---

My Reprap blog

jds-reprap.blogspot.com