Prusia i3 PSU

First timer, I was think of purchasing a Prusia i3 kit from Makerfarm and I only have one PSU to use, I think it hits the right specs but I thought I'd check (refer to picture). Also, is there any place better then makerfarm to buy a Prusa i3 kit in Australia?

If it is only 240watts as it says that very marginal. It appears to have 12v at both 11.5A and 7.5A. You need a minimum of 17 A and 20 or more is better. I would look for a larger one.

Have you tried asking about a supplier on the Australian forum?

---

_______________________________________
Waitaki 3D Printer

Okay, I'll look around for a bigger one. I've contacted makerfarm about suppliers and am waiting for a response.

I'm going to be getting some Prusa i3 aluminium plates made up, let me know if you're interested in that rather than a kit. I'm in Sydney.

I bought this 360 watt that is pretty small and have medium specs for my build.

[www.ebay.co.uk]

Technical Specification

Input Voltage 100-240V AC

Output Voltage 12V DC

Output Current 0 - 30A

Weight 750g

Size (L x W x D) 220 x 115 x 50 mm

Shell Material Metal Case / Aluminium Base

Safety Compliance CCC / FCC / CE

Protection Shortage Protection, Overload Protection, Over Voltage Protection

Working Temperature 0 - 40 ºC

This uk supplier do have good shipping speed to Sweden wath I now ?
But don't now for Australia?

Edited 2 time(s). Last edit at 03/23/2014 09:37AM by Cliff Mellangård.

Hmm seems good, I'll use it as a fallback, a mate of mine just upgraded his computer's PSU so he's giving me his old one. It's a corsair 550 (I think) and it specs should suit the Prusia i3 (I think, I'll be double checking before doing anything regretable).