Welcome! Log In Create A New Profile

Advanced

Castable resin test prints

Posted by astapov 
Castable resin test prints
January 23, 2015 02:56AM
Hello guys,

I want to get a 3d printer to be able to print jewelry models that i can direct cast.
I have been researching for the past 2 weeks and I can't get any test prints from any of the companies that i have contacted.

So far i have VenusCreator Castable Resin, Made Solid Firecast, 3d materials 3dm cast resin.

I don't understand, do they not want my money or are their products just that bad?

Does anyone have experience with these resins on a dlp printer like the b9 or miicraft or similar? I am looking for a wax equivalent or something similar to the shapeways resin.


Regards,

-A
VDX
Re: Castable resin test prints
January 23, 2015 06:06AM
... ask here for Spot-IC - [spotamaterials.com]


Viktor
Re: Castable resin test prints
January 23, 2015 06:20AM
Hi Victor,

Have you had good experience with it?

I think i already left them an email. But their casting material is still under development and has been for a verry long time.
VDX
Re: Castable resin test prints
January 23, 2015 07:38AM
... my experience with spota and his materials is maybe 3 to 4 years old, so not with the actual mixtures.

But I've done lost cast moulding with standard resins too -- here the parts were printed not solid, but with up to 80% mass-/volume-reduction by hollow 3D-rasters inside, with only a solid shell for stability ...


Viktor
Re: Castable resin test prints
February 27, 2015 02:26AM
Hello,

I am currently doing TGA on madesolid firecast and form1 castable resin... and it seems that they are not really different than the standard resin !

I will give the results there after accomplishment.
Re: Castable resin test prints
May 25, 2016 12:40AM
hello,

I need help in to castable resin. I have been used some stander company resins but I had not get 100% result, so please prefer me some stander castable resin for DLP (LED) 3D PRINTER.
Sorry, only registered users may post in this forum.

Click here to login