Hi,
currently my thermistor is always heating no matter if have it activated in repetier/lcd display or not. Even if I just turn on the Power and don't connect the USB-plug it starts heating and doesn't stop. I already repeated every assembly step more than once and followed the e3d wiki but I'm thinking either there is something wrong in the firmware or my board had a shortage which only affected the EXT0. I uploaded my current configs to this post.
At the moment I have an E3D Titan with an E3D v6 hotend for 1.75mm filament aswell as the PiBot Rev 2.0 kit.
Thanks in advance.
Ghondo
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Hallo,
ich habe aktuell das Problem das mein Thermistor die ganze Zeit heizt obwohl es weder in Repetier eingeschaltet worden ist noch über das LCD display. Ich bin jeden Schritt von zusammensetzen mehrere male schon durchgegangen und habe auch auf der E3D-Wiki-Seite jeden Schritt befolgt und befürchte, dass es irgendein Fehler in der Firmware ist oder mir das Board abgeraucht ist. Schon nach dem einschalten und noch bevor die USB-Verbindung hergestellt/eingesteckt ist heizt der Thermistor. Ich lade mal die Einstellungen hier mit hoch.
Aktuell ist ein E3D Titan mit dazugehörigen Elementen für 1,75mm Filament verbaut sowie das PiBot Rev 2.0 Kit.
Ich danke euch für eure Hilfe und bei Fragen schreibt Sie einfach hier rein.
Ghondo
Edited 1 time(s). Last edit at 04/22/2016 11:31AM by Ghondo.
Attachments:
open |
download -
pibot-3d-printer-firmware-v1-06.rar
(293.2 KB)