Hi guys,
I sliced a herringbone gear with Cura and added two "
pause @ z" sessions at 5.6mm and 6.4mm. I wanted to change filament color that way, since I only have one extruder.
The problem is, once the printer triggered the first
pause, the extruder
lifts up and parks somewhere ( 0,0 ?) But the lift of the 1st
pause already triggers the 2nd
pause.
When I noticed, that the second
pause was overdue, I used the smart-LCD to manually change filament, but the symetry was gone...
It should be rewritten to ignore z-position while parking the extruder.
-Olaf
Attachments:
open |
download -
centerline_off.jpg
(252.4 KB)