Marlin 1.0.0 - Upgrade y/n ?

Im currently running Marlin v1.0.0 and have never completed a full firmware upgrade to a new version. Ive tweaked a few settings as I go with success. I just wondered if upgrading to 1.0.2 would provide any noticeable print quality benefits i.e. worth the upgrade........... I am currently thinking "If it ain't broke don't fix it"

Also if I go down the firmware upgrade route is it just a case of retaining the config.h file and updating the rest of the files

thanks

Graham

If you don't have a coreXY or other issues you don't need to flash a newer one.

---

Triffid Hunter's Calibration Guide

--> X <-- Drill for new Monitor

Most important Gcode.

Quote
Wurstnase
If you don't have a coreXY or other issues you don't need to flash a newer one.

Thanks for the reply - Im not familiar with a CoreXY so assume I dont have one.

also If you dont know the intimate details of your printer, eg theremister types, controller board type etc

Its not advisable you upgrade your firmware.. you will spend a month working out the orriginal settings.