On Solidoodle (standard XYZ gantry machine) M206 has no affect. Steps: M501, M206 Z.06, M500, M503 (verify M206), G28 Z. M206 is ignored. Tried with M26 Z1 (which should be noticeable) but didn't work.
Used guide [
airtripper.com]. Changed following in config.h:
#define min_software_endstops false
#define max_software_endstops false
#define Z_MAX_POS 195 (actual space 200)
Compiled downloaded... everything else is fine. Any thoughts?
Roger
PS Not using bed auto level