Welcome! Log In Create A New Profile

uploading error(marlin to mega)

Posted by lidorsho

lidorsho

uploading error(marlin to mega)
July 10, 2013 04:11AM

Registered: 10 years ago
Posts: 1

hi
as the topic says,i've got an error while uploading the firmware to the board....:
In file included from /Marlin.h:23,
from cardreader.cpp:1:
/pins.h:1282:2: error: #error Oops! Make sure you have 'Teensy++ 2.0' selected from the 'Tools -> Boards' menu.
i double checked the board and the port that i selected at tools....
does anyone know what is the problem?
thank you...

Reply Quote

enabrintain

Re: uploading error(marlin to mega)
June 21, 2015 03:06PM

Registered: 14 years ago
Posts: 1

So I bumped into this too, the answer is to follow the directions for compiling the printrboard fork at [www.printrbottalk.com]

Reply Quote

Dust

Re: uploading error(marlin to mega)
June 22, 2015 09:24AM

Admin
Registered: 13 years ago
Posts: 7,000

You say mega in the title , but the code says your have set the board type to something that needs Teensy++ 2.0, probabaly a printrboard.

First identify what board you really have. then edit your configuration.h so the line #define MOTHERBOARD matches your hardware.

Possbale boards are listed here

Edited 2 time(s). Last edit at 06/22/2015 09:29AM by Dust.