Welcome! Log In Create A New Profile

Advanced

Connector identificatiion

Posted by graybeardtx 
Connector identificatiion
August 16, 2017 02:01PM
Can someone help me identify the manufacturer, part number or any other information that will allow me to order additional connectors for some components to my RAMPS1.4 board?
I need connectors for 2, 3 and 4 wire shown in the following picture (http://colliertx.net/connectors.jpeg).
Re: Connector identificatiion
August 16, 2017 02:55PM
1450Pcs Connector Kit 2.54mm PCB Pin Headers Box Packaging For Arduino Dupont EW


Copy paste above Search on E-bay Or From Google

Edited 4 time(s). Last edit at 08/16/2017 02:59PM by Roberts_Clif.
Re: Connector identificatiion
August 16, 2017 08:46PM
The crimps are horrible if you don't have the correct tool

I would suggest you get a set of pre made cables eg [www.aliexpress.com]
Re: Connector identificatiion
August 19, 2017 03:54PM
Thanks for the answers. I also forund that there is a Molex 14-60-xxx part where the xxx identifies the number of positions in the commector.
I have a crimping tool so thats not a problem but I agree that trying to crimp without the proper tools can produce problems.
John
Sorry, only registered users may post in this forum.

Click here to login