GT2 wide pulley - Help

So i had an old vinyl cutter that bit the dust. I salvaged belts and pulleys and electronics from it.

I want to use the belt from the x axis of it on my Yaxis on my new MakerSlide Large mendal max. I have a bracket made for the idler/tensioner bracket i got from the cutter, but the pull to drive the belt is wide, 15mm wide. I have yet to find a GT2 pulley that would fit on a Nema motor to drive this thing.

Any suggestions?

Edited 1 time(s). Last edit at 01/30/2014 01:38PM by Shanegt.

Maybe print one, or you don't have a printer yet?

Otherwise, order them online? There are a lot of them available. However, keep in mind you need to be sure the belt is also GT2 otherwise it will not work.