So i had an old vinyl cutter that bit the dust. I salvaged belts and pulleys and electronics from it.
I want to use the belt from the x axis of it on my Yaxis on my new MakerSlide Large mendal max. I have a bracket made for the idler/tensioner bracket i got from the cutter, but the pull to drive the belt is wide, 15mm wide. I have yet to find a GT2 pulley that would fit on a Nema motor to drive this thing.
Any suggestions?
Edited 1 time(s). Last edit at 01/30/2014 01:38PM by Shanegt.