Welcome! Log In Create A New Profile

Advanced

generating gcode file from stl and obj file by CMD command prompt in windows 10

Posted by debakanta 
generating gcode file from stl and obj file by CMD command prompt in windows 10
August 18, 2016 06:13AM
Hi,
Installed with Cura-15.04.3 and want to generate gcode by CMD command prompt in Windows
While running CuraEngine -s "C:\path\to\STL File\" I'm getting the below output:-

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Affero General Public License for more details.

You should have received a copy of the GNU Affero General Public License
along with this program. If not, see [www.gnu.org].
Default config 'default.cfg' not used
M107
G1 F2700 E-4.50000
G0 F9000 X0.00 Y0.00 Z5.00
M104 S0 ;extruder heater off
M140 S0 ;heated bed heater off (if you have it)
G91 ;relative positioning
G1 E-1 F300 ;retract the filament a bit before lifting the
nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more
G28 X0 Y0 ;move X/Y to min endstops, so the head is out of
the way
M84 ;steppers off
G90 ;absolute positioning

Please let me know how can I get a correct gcode file

Thanks & Regards,
Debakanta
How to print a stl file or its gcode from windows command prompt?


Thanks & Regards,
Debakanta
Sorry, only registered users may post in this forum.

Click here to login