Welcome! Log In Create A New Profile

Advanced

RepRap Cyclone PCB Miller Parts in India

Posted by kaustubh 
RepRap Cyclone PCB Miller Parts in India
March 21, 2016 02:25PM
Hi,

I am trying to build my second reprap machine, a Cyclone PCB Miller. Can you please provide an quote for the following items. (partially taken from [github.com])

I would also be interested in acrylic cutting services.

The bill of material is as follows:

SCREWS
M3x18mm 43
M3x10mm 16
M3x20mm 4
M3x8mm 6
M3x25mm 5
set/grub screw M3x4mm 3

WASHERS
M3 8
M8 6

NUTS
M3 67
M8 11
locking M8 2

BEARINGS
LM8UU 11
B608ZZ 5


SMOOTH RODS
8x210mm 2
8x150mm 2
8x250mm 2

THREADED RODS
M8x205mm 1
M8x290mm 1
M8x95mm 1

MISC
Endstop switch 2
Spring (roughly length:15mm, Ext Dia:11mm, Wire: 1mm, Turns:5)
Silicone tube 12x16x50mm 1 meter
NEMA 17 motor 3
Cable guide tube 1 meter
Probe cable (w/ crocodile clips) 1

Can you direct me to a dealer that can provide me with ALL the parts needed.

Thanks.

Edited 1 time(s). Last edit at 03/21/2016 02:27PM by kaustubh.
Sorry, only registered users may post in this forum.

Click here to login