Welcome! Log In Create A New Profile

Advanced

How safe are safety glasses?

Posted by Cyclonit 
How safe are safety glasses?
August 27, 2017 10:00AM
Hi,

this may be a stupid question for many of you, but I am at the very beginning of my research regarding laser engravers/cutters and was wondering how safe safety glasses actually are. I am aware that there are many sunglasses which don't block all UV light, thus I am wondering if laser safety glasses are capable of blocking out all of the harmful light or if its more of a "if you see a bright light, turn away fast" kind of deal. Especially when dealing with something like a 40W laser, I wonder if they can ruin your eyesight through safety glasses, if one does not look away immediately.

Kind regards,
Cyclonit
VDX
Re: How safe are safety glasses?
August 27, 2017 10:29AM
... the "safety level" is normally given by the "OD"-values printed on the side of the goggles - look here for declaration and comparisons:
[www.thorlabs.de]

This OD-values are different for different wavelengths - so you have to select the goggles specifically for the laser and application you're targeting.

But be careful! - there are some goggles in the market with "faked" OD-values too eye rolling smiley


Viktor
Re: How safe are safety glasses?
August 27, 2017 10:31PM
If you refer to a 40W CO2 laser, you won't see it coming. It's very short UV wavelenght.
Good news is, any clear plastic cover will absorb stray light.
VDX
Re: How safe are safety glasses?
August 27, 2017 11:37PM
... no, the wavelength of a CO2-laser is the opposite direction winking smiley -- it's far, far IR @ 10640nm.

And yes, this wavelength won't pass any of the goggles -- you can shield it totally with any glass or acrylic ...


Viktor
Re: How safe are safety glasses?
August 30, 2017 11:13PM
...I knew it was invisible winking smiley
Sorry, only registered users may post in this forum.

Click here to login