Welcome! Log In Create A New Profile

Advanced

choosing a laser for cutting foam board

Posted by dudu_abdu 
choosing a laser for cutting foam board
October 22, 2016 12:25PM
I'm planing on building a cnc laser cutter for cutting black 5 mm foam board, and if possible some 2 mm plywood.
Right now im trying to figure out what parts do i need, mainly what laser diode do i need.
I know that most of you will suggest building a CO2 laser but that's wayyy out of my budget.
I was thinking of using the NDB7875 diode with G-2 lanses, do you think its enough for my needs? i dont mind making multiple passes

I have a printrbot simple metal 3D printer, so for now the plan is to attach the laser next to the hot-end (it had been done before) just for testing the laser on different materials.
VDX
Re: choosing a laser for cutting foam board
October 23, 2016 11:47AM
... 3W of 445nm is enough for up to 4mm plywood with several passes - I'm cutting 3mm birch plywood with a 2W-diode.

Light dark foam shouldn't be a problem too - I've cut different foam types with up to 10mm thickness.

Could be more problematic then with high density foams and high loads of carbon black ...


Viktor
Sorry, only registered users may post in this forum.

Click here to login