Connectors

After getting my gen 6 electronics and my Nema 17s I found out that the little plastic connectors are really expensive, it has cos me around £10 just on molex type connectors, pin and postage.
I have been searching the internet looking for the power connector that the Gen6 board uses but can't work it out, please does anyone know where I can buy one of these female power connectors (preferably from the UK) so I can rig my power adapter up to the Gen6 board?

This is what is should look like.

If you have trouble finding this specific connector, why not solder some wires directly to the board? Then you can add a cheap connector of your own choice the wires, if you so please.

---

--
-Nudel
Blog with RepRap Comic

If that's all you're buying, it's the shipping that will bump the price up.

Try

www.rapidonline.com

You can buy them from CPC in the UK, I use them on all my connections - CPC


And Here

---

[richrap.blogspot.com]

CPC is owned by Farnell but the Farnell price is higher strange... Farnell distrute world wide thou.

[uk.farnell.com]

---

Bodge It [reprap.org]
=======================================

---

BIQ Sanguinololu SD LCD board	BIQ Stepcon	BIQ Opto Endstop
BIQ Heater Block PCB	BIQ Extruder Peek clamp replacement	BIQ Huxley Seedling
BIQ Sanguinololu mounting	BIQ standalone Sanguinololu or Ramps mounting	Print It Stick It Cut it

My rep strap: [repstrapbertha.blogspot.com]

Buy the bits from B&Q pipestrap [diyrepstrap.blogspot.com]
How to Build a Darwin without any Rep Rap Parts [repstrapdarwin.blogspot.com]
Web Site [www.takeaway3dtech.com]