I have similar problem. I loaded firmware with 8gb SD card. Screen showed loading and updating as it should have to 100%. at end of update, Screen merely shown black with message indicating complete update( I dont remember exact wording). I unplugged USB cable to power down thinking it would reboot and work properly. unit now powers up and simply states"booting" on a black screen. Is there any way to restore to default or factory to try again? I thought I would check before opening new issue. my concern is that old firmware was erased in the process, and new firmware is corrupted somehow.
Edited 1 time(s). Last edit at 01/02/2018 08:45AM by seabassattitude.