Welcome! Log In Create A New Profile

Advanced

lerdge board 32 bits

Posted by titeuf007 
Re: lerdge board 32 bits
June 22, 2017 02:17PM
thanks frank but if you are not happy don t stay here and stop to troll the post
personally i am don t care that is not open source if it s user friendly and if everything working well and it s the case with all great stuff support
i have smoothieboard and i can say you that is not a copy software from them...

Edited 1 time(s). Last edit at 06/22/2017 02:20PM by titeuf007.
Re: lerdge board 32 bits
June 22, 2017 03:13PM
Quote
titeuf007
don t stay here and stop to troll the post

You mean stop raining into your advertising campaign, right? Closed source firmware is the last thing a DIY-community needs.


Generation 7 Electronics Teacup Firmware RepRap DIY
     
Re: lerdge board 32 bits
June 22, 2017 03:15PM
it s you point of view and not all people sharing you spirit
Re: lerdge board 32 bits
June 22, 2017 06:49PM
Quote
titeuf007
it s you point of view and not all people sharing you spirit

Which is a pity. If more people shared @Traumflug's spirit, we would *all* be much better off.
Re: lerdge board 32 bits
June 22, 2017 07:01PM
Traumflug....open or closed source,what is different,,point is that lerdge board work perfect ,Ui is frendly and aesy to configuredirect from diply ,New module coming out and firmware is continuous upgrading,, Accessorizes are plug and pay,,Filament monitor senzor,autolevel sensor,hot bed power module 25 A,Continuous print after power lose,pause print,,,,what you want more,,,Support is perfect,,,sellers on aliexpress respond any time,, have seller support on FB ,,Support on Taobao respond 24/7 in less than 2 minute

i rely hate Marlin and flashing every time when i want change settings,,but i do not shit on forum about that,


Here we share personal positive and negative experience about board ,and give recommendations where to buy ,how to fix or set board,sharing manuals and links,That is point of this forum
You miss that point in your open source campaign.
Re: lerdge board 32 bits
June 23, 2017 12:21AM
i fully agree with grim
i have tried two open source and both are pain to tune and have less features,less userfriendly
Re: lerdge board 32 bits
June 23, 2017 02:12AM
Quote
grimlok2000
open or closed source,what is different

Interesting lack of knowledge. RepRap exists because it's open source. Before RepRap we had several decades of closed source, accordingly 3D-printing was pricey and without innovation. Clearly, returning to closed source also means returning to technological stillstanding.


Generation 7 Electronics Teacup Firmware RepRap DIY
     
Re: lerdge board 32 bits
June 23, 2017 02:23AM
To me pleasure lerdge Boardhot smiley
I pay for what they like
Possibility to remove the logo from the UIsmileys with beerthumbs up
Better to pay


DELTA Printer - Alligator board - Server Repetier Touch - E3D_V5
Re: lerdge board 32 bits
June 23, 2017 03:00AM
I just to receive mine.
It s incredible small and very good quality
Attachments:
open | download - orca-image-1498211747960.jpg_1498211748156.jpeg (286.6 KB)
Re: lerdge board 32 bits
June 23, 2017 04:22AM
I use on my HBot
With E3dv6 TMC2100 BLtouch



Edited 2 time(s). Last edit at 06/23/2017 04:29AM by maralb.

DELTA Printer - Alligator board - Server Repetier Touch - E3D_V5
Re: lerdge board 32 bits
June 23, 2017 04:34AM
This forum is not just for users but also for developers. So please respect the different opinions expressed.

I looked at the leadger board and thought it was quite interesting. The problem is that it can not do what I want to do. I then looked for information and the schematic alone would be enough for me to develop the functionality that I need. An open source firmware would make it even easier for me and others like me to extend what this board can do.

I fully understand that to many it is not important for a board to be open source. If it has all the features you need why bother. And you are right to just use that board anyway. As long as you are happy with that everything is fine.

Everybody please understand that different people have different requirement for what they need for their printer. And a closed source board that is not the perfect fit is a total fail. A open source board that is not the perfect fit is an invitation to make it fit. And that is what reprap is for!

Don't forget reprap only exist because it is open source / open hardware and that it exists made 3dprinter prices come down from 100k-500k and more to where they are now. Everybody should be interested to keep the environment as open as possible as this brings the prices down and gets new developments going. If we agree on that then it is also OK to use a closed source board with a closed source firmware once in a while,...
Re: lerdge board 32 bits
June 23, 2017 06:41AM
this post is not to speak about about open source but for an another product available for us reprap !it s not north korean here and we can speack about everything!!
every two post i see promo for smoothie or duet board and nobody say something about that..so i think we need respect for non open source (on top of that it s not a simple open source copy firmware)
this board working very well and there are all features and more than open source for half of the cost without brainstorming .
i don t understand people with this kind of mentality...you have bad word for everything which is not in the same mind and spirit that you have

Edited 1 time(s). Last edit at 06/23/2017 06:54AM by titeuf007.
Re: lerdge board 32 bits
June 23, 2017 10:14AM


hello owners of Lerdhe board

Dual extruder module is published and you can order module on Aliexpress 3Dsway international shopp..New firmware is ready with new UI and will be published next week on offical page.

[www.aliexpress.com]

Keep calm and go shopping,
Re: lerdge board 32 bits
June 23, 2017 10:56AM
do you have an idea when wifi suppot will be available?
it s a good news to see a new improvement
Re: lerdge board 32 bits
June 23, 2017 11:12AM


you can ask Lerdge support any time,,sign in on Taobao ,,install Aliwanwang messenger and you are online with manufacturer
Re: lerdge board 32 bits
June 24, 2017 03:39AM
ok thanks for you help
since yesterday i play with my new board and i like it a lot
it s very simple and screen touch is very good
today i will try to test auto tune for my bed..if it working well, my next prject will have the same board
Re: lerdge board 32 bits
June 24, 2017 02:22PM
Hello! I have a lerdge board since 4 months.
I've had many problems and also broke a board, but now it works.
I have a bltouch but the pushpin doesn't want to push out when the board wants it to. Please help me with the BLTouch D:.
Also, could you please send me the new firmware because I don't want to wait.
Re: lerdge board 32 bits
June 24, 2017 05:31PM
Lerdge working with bl touch ,Firmware version 1,1,7 /beta 6) can download on official page Lerdge.com
Check youtube video Autolevel Lerdge 3d bltouch posted by Christophe Sogorb

[www.youtube.com]

Servo Socket: Servo Large
Contactor socket: endstop prob
Probe stowed Angle : 90
Probe open Angle : 10
Firmware 1.1.7 Beta6
One for the servo (brown, red, yellow) and one for the contact (black, white).
Once connected, it is necessary to modify in the menu:
Structure, Fdm, XYZ, Advanced Options, Autoleveling Setting:
Probe stowed Angle: 90
Probe open angle: 10
To launch an autolevel:
Setting (green):
Leveling, Execute automatic leveling
and it's good smiling smiley

new version of firmware and new UI will be publish in few days,,
Re: lerdge board 32 bits
June 25, 2017 03:58AM
Thanks for the answer!
I've already connected everything as it should and the software is set correctly. But it doesn't work sad smiley.
It makes the self test and then stays with pin up.
Re: lerdge board 32 bits
June 29, 2017 02:16AM


Hello
If you need new firmware 2.0.0 beta1 and new UI sent me private message and your email address,,It is not published on official page ,,I get from Lerdge support on Taobao..

Edited 2 time(s). Last edit at 06/29/2017 02:47AM by grimlok2000.
Re: lerdge board 32 bits
June 30, 2017 10:20AM
hello

I have cancel one Kossel MAX building and want sell one Lerdge board with full bundle,Board is third gen version 1.0.2 thermistor version with 2 fan.,4 x lv8729 stepper drivers,Pressure level sensor e3d nozzle,Filament detection for 1.75mm, Hot bed 25A external module,4 mechanical end stops,USB PC link module,Power continuous printing module all cable and button included. On photo are not all parts,

Dual extruder module and 1x LV 8729 driver is under order and it is shipped,will sent to you when arrive ,,

For price please visit Aliexpress 3DSway and add all item in basket to calculate price or simply open attachment .I already pay custom taxes 25% when i import set but I will charge Aliexpress price and shipping from Croatia to EU countries cca +15 Euro,
Internationally tracked with delivery 3-5 working days

New Lerdge Store on Ali New version firmware is nice displayed .

[www.aliexpress.com]

Edited 2 time(s). Last edit at 06/30/2017 10:38AM by grimlok2000.
Attachments:
open | download - lerdge.jpg (82.9 KB)
Re: lerdge board 32 bits
July 05, 2017 04:28AM
Hello Friends,
Warn firmware development
It is possible to reverse the position of Touch X with Y

Have some problem with the window exit from the screen.
watch videos
[drive.google.com]


DELTA Printer - Alligator board - Server Repetier Touch - E3D_V5
Re: lerdge board 32 bits
July 05, 2017 12:39PM
i test all my board with 2,0 and 1.1.7beta 6 firmware ,,it all works identical way as on your video ,,you must press directly on icon,,,icon square do not work as single button,,it respond only when touching icon,,in corner do not responding ,i use my fat finger ,not stilus pen and did not observe that before ,,i have sent message to Lerdge support regarding reverting X and Y command on display to get indentical movement on display and real movement on printer x commnd left -right,,Y forward- aft

i receive dual extruder module,,i did not test in print but have connected to board and it have normal reading of temperature ,heating and motor control.Waiting for delivery 2 in 1 extruder



Edited 1 time(s). Last edit at 07/05/2017 12:55PM by edvard051.
Re: lerdge board 32 bits
July 06, 2017 04:52AM
It would be nice to have the app to be able to modify the display. For these a replica of the chitu. With their soft have little even modify the logo of the lerdge for free grinning smiley

sorry for translation
Re: lerdge board 32 bits
July 07, 2017 02:35AM
It would be very nice to customize language and logo myself.
But thats the problem with cloused source. I already got some sucesses with changing the boot logo, but it looks distorted sad smiley.
Re: lerdge board 32 bits
July 14, 2017 12:07AM
UI 2 is a big bug with the change of materials the head is down and bursts on the z in delta mode moody smiley On the other hand with an ui 1.1.6 or 1.1.7 no problem

Edited 2 time(s). Last edit at 07/14/2017 12:09AM by kryozxcrew.
Re: lerdge board 32 bits
July 14, 2017 09:51AM
version 2,0 is not official released,,,it is testing version ..some bugs are reported back lerdge and fixing is in progress,,1.1.7 beta6 is last official version,,,
Re: lerdge board 32 bits
July 14, 2017 10:39AM
1.1.7 and also a BETA
No bugs, but always Beta6
I use it with my HBot and also run bedlevel
I'm waiting for the new Dual extruder module ........
See how it behaves

Edited 2 time(s). Last edit at 07/14/2017 10:42AM by maralb.

DELTA Printer - Alligator board - Server Repetier Touch - E3D_V5
Re: lerdge board 32 bits
July 14, 2017 12:05PM
,if anyone need i have in spare and will not use

Dual extruder module thermistor version with LV8729 driver
25A hot bed power module .
Power continuous print after power lose
USB PC link
Re: lerdge board 32 bits
July 15, 2017 08:43AM
Quote
grimlok2000
[attachment 95457 19059572_2040296889532998_2388292078743402923_n.jpg] [attachment 95459 19114023_2040297512866269_6699880426531766745_n.jpg]

lerdge is single extruder board,for dual extruder you need module , Lerdge just start selling on Taobao

[world.taobao.com]

This is all very good but it wont translate into english
Sorry, only registered users may post in this forum.

Click here to login