Melzi with latest Arduino IDE? February 14, 2017 09:36AM |
Registered: 7 years ago Posts: 3 |
Could not find boards.txt in /Users/peter/Documents/Arduino/hardware/Melzi/cores. Is it pre-1.5? Could not find boards.txt in /Users/peter/Documents/Arduino/hardware/Melzi/variants. Is it pre-1.5? WARNING: Error loading hardware folder /Users/peter/Documents/Arduino/hardware/Melzi No valid hardware definitions found in folder Melzi.
Re: Melzi with latest Arduino IDE? February 14, 2017 10:09AM |
Registered: 7 years ago Posts: 3 |
Arduino: 1.8.1 (Mac OS X), Board: "Sanguino, ATmega1284 or ATmega1284P (16 MHz)" Sketch uses 1084 bytes (0%) of program storage space. Maximum is 130048 bytes. Global variables use 9 bytes (0%) of dynamic memory, leaving 16375 bytes for local variables. Maximum is 16384 bytes. avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x00 avrdude: stk500_recv(): programmer is not responding avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x00 avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x73 avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x74 avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x61 avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x72 avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x74 avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x0d avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x0a avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x53 Problem uploading to board. See [www.arduino.cc] for suggestions.
Re: Melzi with latest Arduino IDE? February 22, 2017 06:49PM |
Registered: 7 years ago Posts: 3 |
Re: Melzi with latest Arduino IDE? October 12, 2017 01:45PM |
Registered: 6 years ago Posts: 1 |