Hi!,
Same printer, same firmware.( only one difference: #define MOTHERBOARD 33/62 in configuration.h)
When use Mega 2560 , connection with Pronterface:
Printer is now online.
echo: External Reset
Marlin 1.0.0
echo: Last Updated: June 30 2015 14:43:11 | Author: (none, default config)
Compiled: June 30 2015
echo: Free Memory: 3383 PlannerBufferBytes: 1232
echo:Hardcoded Default Settings Loaded
echo: Steps per unit:
echo: M92 X160.00 Y160.00 Z5120.00 E100.32
echo:Maximum feedrates (mm/s):
echo: M203 X500.00 Y500.00 Z5.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X9000 Y9000 Z100 E1000
...................................
When use Sanguinololu with Pronterface:
Connecting......
okT:23 B:24
Printer is now online...
Why in this case the parameters are not displayed?
www.printxyz.ro
