Hi,
I have built a Gen& Ver1.5 board. While doing power checks as instructed, i am getting an unexpected voltage for more than 0.5V on the following pins of ATMega Socket. Pins are 8,14,15,24,28,29,35,36.
Pin 28 has 2 volt, 29 has 1 volt and pins 35,36 have 2.4 volt.
Also, the lower row of pololus drivers is having the same problem.
Please tell what the problem is.?
Please Advice if it is safe to go ahead?
Thanks
Yashu
Edited 1 time(s). Last edit at 06/30/2015 04:15AM by yashu262.