MakeMendel.com
Help file for LCD connection to PrintrBoard RevF
1) There are 6Pcs of flat cables are given. Kindly connect them as shown in attached images.
2) Kindly ensure to keep the view of the LCD and PrintrBoard as shown in the above image only.
3) Kindly ensure that the each wire from LCD goes to corrosponding pin on PrintrBoard Rev F.
4) Kindly note you have to put correct marlin firmware to your PrintrBoard. You can download the Marlin for RevF from our website www.makemendel.com
If you have any questions or need any help, then feel welcome to contact us at
[email protected]