MakerCoast SR2 3D Printer Board Announcement
Posted by sunnyc90
|
MakerCoast SR2 3D Printer Board Announcement June 02, 2014 06:20PM |
Hello all,
We would like to officially announce a new board we are bringing to market, the MakerCoast SR2. The SR2 (Sanguino REV 2.0) is a derivative of the original Sanguinololu. We updated the old board and bringing over some cool features!
Features:
Atmel Atmega 1284p with integrated FTDI USB Chip
Expansion headers for Bluetooth Module
Integrated LCD headers for SmartLCD and Graphic LCD
4 End-Stops (X, Y , Z, Bed Level Probe sensor)
Select-able switch for Probe Sensor or Z hold.
2-pin - 4-pin End-Stop Compatible
4-Pin ATX or 2-Pin with Power Input range from 12V-35V (2 pin standard)
Screw terminals on hot-end, heat-bed, thermistors, and stepper motors.
8 x 12V rails for Fans, LED's and other accessories.
Select-able Voltage for end-stops (Default 5v, Option for 12V)
Compatible with Pololu And Stepstick Drivers
Mosfet control for 1 Hot End and 1 Head Bed
Over the coming weeks, we will first integrate the SR2 into the marlin firmware and then the rest will follow. Documentations and wiring diagrams will be posted up on our site once it's completed.
The SR2 will be offered with stepper drivers for an introductory price of $100 throughout our campaign. By the end of the week, we will offer the SR2 through Indiegogo and Kickstarter. This will allow us to offer the board at an affordable price. We are proud to bring the SR2 to life and would love to see the open source community integrate it into their projects. Thank you!
MakerCoast | Dream it. Design it. Make it.
Edited 1 time(s). Last edit at 06/02/2014 06:49PM by sunnyc90.
We would like to officially announce a new board we are bringing to market, the MakerCoast SR2. The SR2 (Sanguino REV 2.0) is a derivative of the original Sanguinololu. We updated the old board and bringing over some cool features!
Features:
Atmel Atmega 1284p with integrated FTDI USB Chip
Expansion headers for Bluetooth Module
Integrated LCD headers for SmartLCD and Graphic LCD
4 End-Stops (X, Y , Z, Bed Level Probe sensor)
Select-able switch for Probe Sensor or Z hold.
2-pin - 4-pin End-Stop Compatible
4-Pin ATX or 2-Pin with Power Input range from 12V-35V (2 pin standard)
Screw terminals on hot-end, heat-bed, thermistors, and stepper motors.
8 x 12V rails for Fans, LED's and other accessories.
Select-able Voltage for end-stops (Default 5v, Option for 12V)
Compatible with Pololu And Stepstick Drivers
Mosfet control for 1 Hot End and 1 Head Bed
Over the coming weeks, we will first integrate the SR2 into the marlin firmware and then the rest will follow. Documentations and wiring diagrams will be posted up on our site once it's completed.
The SR2 will be offered with stepper drivers for an introductory price of $100 throughout our campaign. By the end of the week, we will offer the SR2 through Indiegogo and Kickstarter. This will allow us to offer the board at an affordable price. We are proud to bring the SR2 to life and would love to see the open source community integrate it into their projects. Thank you!
MakerCoast | Dream it. Design it. Make it.
Edited 1 time(s). Last edit at 06/02/2014 06:49PM by sunnyc90.
Sorry, only registered users may post in this forum.