Hey Everybody,
I have a question about power supply's. Basically I'm trying to get my ATX24 PSU which I salvaged from a old computer (I have tested it in my PC and everything work fine) but I cant get it to activate when it's connected to my Gen 7 1.4 board, the PSU is on I just need to activate it. I have tried adding a load to it by connecting 12v light bulbs and a disk drive but it wont activate unless it connect it to a normal motherboard. I have also tried to connecting the ground to the power on (green) pins of the connector and that didn't work. Apparently that should always work.
Just wondering if anyone have come accross this before and know if there is anything I can do.
Many Thanks,
Leo.
