Welcome! Log In Create A New Profile

Advanced

Temperature settings not honoured

Posted by rparkins 
Temperature settings not honoured
January 05, 2014 06:58AM
The settings in the Temperature page
Object First Layer Infill Temperature
and
Object Next Layers Temperature
have no effect on the gcode generated by Skeinforge.

The following patch makes a crude attempt at doing the right thing. Note that Alteration has to be active with Replace Variable with Setting enabled for it to work. The two smileys are actually closing backets ")". I don't know how to persuade this WIKI to display what I type literally.

fill.py 2012-11-09 15:46:31.000000000 +0000
***************
*** 867,878 ****
self.isJunctionWide = True
surroundingCarves = []
self.distanceFeedRate.addLine('(<layer> %s )' % rotatedLayer.z)
- if layerIndex == 0:
- self.distanceFeedRate.addLine('(<alterationDeleteThisPrefix/>winking smileyM104'
- + ' S<setting.temperature.objectFirstLayerInfillTemperature>')
- else:
- self.distanceFeedRate.addLine('(<alterationDeleteThisPrefix/>winking smileyM104'
- + ' S<setting.temperature.objectNextLayersTemperature>')
if layerRemainder >= int(round(self.repository.diaphragmThickness.value)):
for surroundingIndex in xrange(1, self.solidSurfaceThickness + 1):
self.addRotatedCarve(layerIndex, -surroundingIndex, reverseRotation, surroundingCarves)
--- 867,872 ----
Re: Temperature settings not honoured
March 21, 2014 08:34PM
Do you think this is your problem?:

[github.com]

I have been putting various skeinforge enhancements into a git repository and used nopheads Skeinforge50plus as a starting point. Mine is at [github.com]

Cheers,
Len.
Sorry, only registered users may post in this forum.

Click here to login