The settings in the Temperature page
Object First Layer Infill Temperature
and
Object Next Layers Temperature
have no effect on the gcode generated by Skeinforge.
The following patch makes a crude attempt at doing the right thing. Note that Alteration has to be active with Replace Variable with Setting enabled for it to work. The two smileys are actually closing backets ")". I don't know how to persuade this WIKI to display what I type literally.
fill.py 2012-11-09 15:46:31.000000000 +0000
***************
*** 867,878 ****
self.isJunctionWide = True
surroundingCarves = []
self.distanceFeedRate.addLine('(<layer> %s )' % rotatedLayer.z)
- if layerIndex == 0:
- self.distanceFeedRate.addLine('(<alterationDeleteThisPrefix/>)M104'
- + ' S<setting.temperature.objectFirstLayerInfillTemperature>')
- else:
- self.distanceFeedRate.addLine('(<alterationDeleteThisPrefix/>)M104'
- + ' S<setting.temperature.objectNextLayersTemperature>')
if layerRemainder >= int(round(self.repository.diaphragmThickness.value)):
for surroundingIndex in xrange(1, self.solidSurfaceThickness + 1):
self.addRotatedCarve(layerIndex, -surroundingIndex, reverseRotation, surroundingCarves)
--- 867,872 ----