I'm hosting a non-profit event on art & 3D printing this April 8 at the Downtown Seattle Public Library main auditorium.
We need someone to host a printer for a live demo during the event.
We've asked around many places with little luck. I'm not making any money, if anything, losing it just trying to post around & gather a crowd for the event.
I have several 3-4 inch tall models print ready, YodaGandhi in the attachment is one,
tested many times via Shapeways.
I can re-size or format for any spec's, DXF, STL, OBJ whatever's necessary. My models now on Shapeways are STL. I've also formatted them as DXF on an SD card as I understand this is protocol for some printers.
Any printed material is fine. We won't be picky. Just having the printer run live while I'm talking & showing slides is the key.
The event is about an hour, can run 1.5 hrs. If a printer is brought down about an hour early, maybe a 3-4 inch print could finish in about 2 hours?
The event is 7-8pm Wednesday April 8, 2015
Facebook event info here
Event info also on my website
Of course we would take every opportunity to publicly thank & promote your work at the event. The capacity for the auditorium is over 300. We're really trying hard to get some publicity & fill the place.
Hopefully it turns out to be a solid format to highlight your printer and the work you do.
Thank you sincerely for your time reading this.
My cell (I don't get texts)- 206-853-0925
My email (my #1 communicado)-
leavittmichael@gmail.com
-Mike