Hello, je suis bloqué avec la configuration sous repetier d'un thermistor 100k beta 3950 1% thermistor (4.7k pullup), je n'arrive pas a trouver le code qu'il faut que j'entre dans extruder.cpp qui est comme ca :
{1*4,8*938}, {31*4,8*314}, {41*4,8*290}, {51*4,8*272}, {61*4,8*258}, {71*4,8*247}, {81*4,8*237}, {91*4,8*229}, {101*4,8*221}, {111*4,8*215}, {121*4,8*209},
{131*4,8*204}, {141*4,8*199}, {151*4,8*195}, {161*4,8*190}, {171*4,8*187}, {181*4,8*183}, {191*4,8*179}, {201*4,8*176}, {221*4,8*170}, {241*4,8*165},
{261*4,8*160}, {281*4,8*155}, {301*4,8*150}, {331*4,8*144}, {361*4,8*139}, {391*4,8*133}, {421*4,8*128}, {451*4,8*123}, {491*4,8*117}, {531*4,8*111},
{571*4,8*105}, {611*4,8*100}, {681*4,8*90}, {711*4,8*85}, {811*4,8*69}, {831*4,8*65}, {881*4,8*55},
{901*4,8*51}, {941*4,8*39}, {971*4,8*28}, {981*4,8*23}, {991*4,8*17}, {1001*4,8*9}, {1021*4,8*-27},{1023*4,8*-200}
merci d'avance
Edited 1 time(s). Last edit at 08/30/2016 03:04PM by maximeh.
