Hello guys,
I really do hope one of you can help me out.
Iv'e built a Mendel 90 from nopheads manual. I sourced all the parts and learned along the way. The mechanical part was pretty easy, the electronics were a bit challenging though.
I hooked everything up and turned it on. The port wasnt showing up but I managed to solve that.
My printer feels kinda shocky, I don't know how to explain, it's like I can feel it when I touch it and sometimes when my foots on the ground it can actually hurt.
But my main frustration is that when I plugged it into my computer and tried to make it move with Pronterface (printrun), it wasnt as smoothly as I expected. I got the z axis to move a bit, but only up and then it completely ignore the endstop and just kept pressing up.
Now the situation is like this when playing around with pronterface: x axis and z axis eventually make sounds that show that they are working. If I try to move the axis, it's frozen there, I can see that the motor is working. But it doesn't move a millimetre. Not even a little bit like I got the z axis to move last night. The y axis never showed any sign of being alive.
I posted the issue on youtube, please take a loot: [
youtu.be]
This is the log from pronterface:
Connecting...
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
Attempted to write invalid text to console, which could be due to an invalid baudrate
start
Printer is now online.
echo:Marlin 1.1.0-RC8
echo: Last Updated: 2016-12-06 12:00 | Author: (none, default config)
Compiled: Jan 22 2018
echo: Free Memory: 3928 PlannerBufferBytes: 1168
echo:Hardcoded Default Settings Loaded
echo
teps per unit:
echo: M92 X80.00 Y80.00 Z4000.00 E500.00
echo:Maximum feedrates (mm/s):
echo: M203 X200.00 Y300.00 Z5.00 E25.00
echo:Maximum Acceleration (mm/s2):
echo: M201 X3000 Y3000 Z100 E10000
echo:Accelerations: P=printing, R=retract and T=travel
echo: M204 P3000.00 R3000.00 T3000.00
echo:Advanced variables: S=Min feedrate (mm/s), T=Min travel feedrate (mm/s), B=minimum segment time (ms), X=maximum XY jerk (mm/s), Z=maximum Z jerk (mm/s), E=maximum E jerk (mm/s)
echo: M205 S0.00 T0.00 B20000 X20.00 Y20.00 Z0.40 E5.00
echo:Home offset (mm)
echo: M206 X0.00 Y0.00 Z0.00
echo
ID settings:
echo: M301 P22.20 I1.08 D114.00
echo: M304 P10.00 I0.02 D305.40
echo:Filament settings: Disabled
echo: M200 D3.00
echo: M200 D0
echo
D init fail
SENDING:M84