Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 February 04, 2015 06:13AM |
Registered: 10 years ago Posts: 87 |
Re: Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 February 04, 2015 07:19AM |
Registered: 9 years ago Posts: 100 |
Re: Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 February 04, 2015 08:39AM |
Registered: 10 years ago Posts: 87 |
Re: Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 February 04, 2015 08:03PM |
Registered: 9 years ago Posts: 100 |
Re: Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 February 05, 2015 03:14AM |
Registered: 10 years ago Posts: 87 |
Re: Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 February 05, 2015 08:04AM |
Registered: 9 years ago Posts: 376 |
Quote
victorjung
Yeah, but i would like to shutdown the hot end fan at the end of the print...even if the 12 is still on.I tried M42 which seems a nice option for me, but it doesnt do anything, the pin 10 i am trying to control stay at zero withs M42 P10 S255
Any ideas why?
thanks for your help anyway
Re: Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 February 05, 2015 01:11PM |
Registered: 10 years ago Posts: 26 |
// Extruder cooling fans // Configure fan pin outputs to automatically turn on/off when the associated // extruder temperature is above/below EXTRUDER_AUTO_FAN_TEMPERATURE. // Multiple extruders can be assigned to the same pin in which case // the fan will turn on when any selected extruder is above the threshold. #define EXTRUDER_0_AUTO_FAN_PIN 9 #define EXTRUDER_1_AUTO_FAN_PIN -1 #define EXTRUDER_2_AUTO_FAN_PIN -1 #define EXTRUDER_3_AUTO_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
Re: Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 February 12, 2015 03:49AM |
Registered: 10 years ago Posts: 87 |
Re: Controlling 2 fans with ramps 1.4 marlin ans motherboard 35 October 11, 2015 09:03AM |
Registered: 8 years ago Posts: 18 |