Welcome! Log In Create A New Profile

Advanced

CoreXY Machines

http://reprap.org/wiki/CoreXY 
Subject Views Posts Last Post

Belt Slap causing Shifting Layer

by clyevo
716 18 06/06/2017 06:29AM
Last Post by ZPRO Solutions

Problem with oval shapes. Attachments

by MagicMarcus
321 10 06/04/2017 10:53PM
Last Post by MagicMarcus

Moving a heavy bed

by pugzor
355 10 06/04/2017 08:31AM
Last Post by o_lampe

Core XY mystery

by n9jcv
925 30 05/29/2017 11:18AM
Last Post by deckingman

New CoreXY Design - Mounting Linear Guide Rail on Aluminium Extrusion Attachments

by yngndrw
1,524 12 05/29/2017 08:21AM
Last Post by Qdeathstar

3kg plus print head anyone?

by deckingman
313 6 05/29/2017 02:00AM
Last Post by deckingman

My CoreXY build log

by TE78
1,176 23 05/26/2017 10:59PM
Last Post by TE78

Z Axis - Sliding Parallel Table Attachments

by Mogal
1,191 13 05/20/2017 11:34AM
Last Post by Mogal

CoreXY, fixed bed

by McZ
628 8 05/15/2017 12:55AM
Last Post by o_lampe

[Poll] Bed mounted on springs ( prusa-style ) ?

by o_lampe
555 13 05/11/2017 01:49PM
Last Post by animoose

CORE XY Enclosure Attachments

by RepRot
1,076 19 05/11/2017 01:12PM
Last Post by RepRot

Core XY triple leadscrew 30x30x45 Attachments

by lukaCX
1,679 14 05/09/2017 09:56AM
Last Post by lkcl

Atfer Hbot, go to CoreXY.   (Pages: 1 ... 12 13 14)

by zelogik
365,066 395 05/07/2017 02:05PM
Last Post by Paranoid

Moving bed or Moving Gantry(Head)

by Celcius1
297 4 05/06/2017 07:48PM
Last Post by the_digital_dentist

Switch to horizontal dual x linear rails? Attachments

by DjDemonD
371 6 05/01/2017 11:40AM
Last Post by Origamib

Advice on belt path Attachments

by nikker
538 7 04/24/2017 08:28PM
Last Post by nikker

echo: too long extrusion prevented

by Jagtech
288 2 04/23/2017 12:46PM
Last Post by sigxcpu

AliExpress CoreXY Kit Questions

by ianiro
870 4 04/21/2017 12:41AM
Last Post by robb_nl

z axis not lowering.

by clogs51
242 2 04/16/2017 11:35PM
Last Post by o_lampe

CoreXYNZ build   (Pages: 1 ... 6 7 8)

by RodF
14,228 233 04/16/2017 02:30PM
Last Post by RodF

Looking for a 3D Printer that meets these specs:

by DaHai8
564 17 04/13/2017 08:58AM
Last Post by prot0typ1cal

My Core XY Build

by theory
1,494 29 04/09/2017 07:20AM
Last Post by the_digital_dentist

Cheaper alternative to Eclips3D v2 design

by Octocom199
1,033 8 03/31/2017 09:22AM
Last Post by Origamib

Need help with 1st time Core XY build

by scarecrow2k6
451 10 03/28/2017 07:44PM
Last Post by the_digital_dentist

Jim's corexy

by Jim Fong
922 21 03/21/2017 01:01PM
Last Post by Jim Fong

Corexy movement Help   (Pages: 1 2)

by dthomas6184
1,304 40 03/16/2017 05:23AM
Last Post by dthomas6184

[RRF1.17e] Bed leveling with M557 or bed.g?

by o_lampe
214 3 03/11/2017 05:53AM
Last Post by o_lampe

RAMPS and CoreXY

by Kewtdz
808 7 03/07/2017 01:20PM
Last Post by Kewtdz

CoreXY & 0.9° steppers too much for 8bit ?

by o_lampe
573 13 03/07/2017 02:41AM
Last Post by o_lampe

Arduino Mega + Ramps 1.4 + CoreXY Plotter

by AAC
326 5 03/06/2017 12:01PM
Last Post by o_lampe