Subject		Views	Posts	Last Post
	At my wits end with PETG   (Pages: 1 2) by Lymphomaniac1	22,187	51	04/09/2016 05:26PM Last Post by DRTak
	Z Axis not moving during print by White.Renard	10,071	20	04/09/2016 05:14PM Last Post by JamesK
	Retraction? Esteps? Temperature? Speed? Nothing seems to work (Prusa Steel/Simplify3D) by tomwleech	812	6	04/08/2016 05:46PM Last Post by ggherbaz
	Mating Issues Between Two Printed Parts by GaM3r2Xtreme	615	7	04/08/2016 04:45PM Last Post by GaM3r2Xtreme
	Hotted not maintaining temperature by gmartell	659	16	04/08/2016 01:51PM Last Post by JamesK
	Stopping during prints by Rainney	443	7	04/08/2016 11:28AM Last Post by Tocsin
	Layer Height Issue by Lzrstrm	408	4	04/07/2016 04:20PM Last Post by JamesK
	Hot end and heat bed won't heat to full temperature by bronks	15,102	18	04/06/2016 07:53PM Last Post by Downunder35m
	Ramps and display / 5V problems by Downunder35m	2,731	4	04/06/2016 07:51PM Last Post by Downunder35m
	5vSB Thermistors Problem by ALegiedz	413	7	04/05/2016 10:58AM Last Post by TbirdMan
	Arduino + Ramps + LCD by Capinho	642	7	04/04/2016 09:21PM Last Post by Downunder35m
	Nozzle lifted by previously deposited filament? by lukie80	641	7	04/04/2016 06:23PM Last Post by Tinchus
	Perimeters fine, top infill fine, inside infill... ...dotty? by Darmach	524	4	04/04/2016 06:46AM Last Post by Darmach
	Simplify3d: Infill and perimeter gaps by puolikas	4,528	3	04/03/2016 11:49AM Last Post by Dirty Steve
	Newbie questions on PLA filament and MBMini short review by servant74	511	5	04/02/2016 10:52PM Last Post by servant74
	Poor quality PLA by Tocsin	733	9	04/02/2016 04:17PM Last Post by JamesK
	Getting ghosting, zits, pimples and really ugly prints by Naesstrom	703	3	04/02/2016 02:29PM Last Post by Naesstrom
	Metal plate 40cm x 40cm on top of 20cm x 20cm heatbed? Do i even need one for diamond hotend (PLA) ? by KING2882000	689	5	04/01/2016 08:57PM Last Post by Downunder35m
	Prusa I3 directions (X-Y) by Wardru	1,016	5	04/01/2016 08:33PM Last Post by chris33
	z axis or y axis problem by garibardi1011	416	4	04/01/2016 09:02AM Last Post by JamesK
	Prusa i3 - Y axis slow response by Danikin	503	5	04/01/2016 07:34AM Last Post by Danikin
	Perfect prints..? by chriske	527	6	03/31/2016 09:32PM Last Post by the_digital_dentist
	Weird bumps on the final layer(s) by rahim	491	3	03/31/2016 10:41AM Last Post by BuildAThing
	Simple question on using .5mm nozzle by WalkerMaker	791	6	03/31/2016 07:57AM Last Post by Gaou
	aluminum bed and pla curling off blue tape. by viper	913	5	03/31/2016 07:47AM Last Post by WalkerMaker
	x axis shifting and less material flow while printing by ravi.lingannavar	363	3	03/31/2016 02:12AM Last Post by ravi.lingannavar
	Prusa i3 printing wrong direction by Wardru	539	2	03/30/2016 10:47PM Last Post by JamesK
	MATERIAL DOES NOT MELT PROPERLY by zenerdyod	312	2	03/30/2016 03:47PM Last Post by frankvdh
	first few layers of ABS print are smaller, the rest is amost perfect. by amigob	1,581	3	03/30/2016 02:48PM Last Post by amigob
	Flexible filament stops extruding at random times by siderala	670	1	03/30/2016 01:24PM Last Post by siderala