Welcome! Log In Create A New Profile

Advanced

Firmware - experimental, borrowed, and future

Subject Views Posts Last Post

Recommended host software for Teacup?

by floe
1,301 3 07/05/2011 03:44AM
Last Post by floe

alternatives to current linear Bresenham algorithm

by jamesdanielv
3,341 20 06/28/2011 05:18AM
Last Post by jamesdanielv

Teacup connection Problem

by mostley
1,304 17 06/26/2011 10:37AM
Last Post by nophead

TeaCup M105 not reporting properly / but temperature is stable

by stefanst
1,792 25 06/24/2011 07:05AM
Last Post by aka47

Teacup Acceleration Ramping

by Andrew Diehl
1,824 9 06/23/2011 12:18AM
Last Post by Traumflug

any suggestions on buffer compression in firmware?

by jamesdanielv
1,535 8 06/11/2011 04:15PM
Last Post by jamesdanielv

Beizer Curve code for sprinter

by djwillms
1,775 10 06/07/2011 12:52PM
Last Post by jamesdanielv

Teacup on Gen6

by jim_blag
1,590 7 06/04/2011 10:19PM
Last Post by Triffid_Hunter

Teacup: M101, G162 and M92 commands (bugs?)

by hariseldon78
1,224 3 06/02/2011 04:56AM
Last Post by hariseldon78

A look at firmware output quality

by jv4779
1,197 16 05/30/2011 11:40AM
Last Post by BodgeIt

Arm vs AVR & SD memory card support

by sheep
2,359 8 05/26/2011 03:33AM
Last Post by Triffid_Hunter

Per-Axis acceleration

by Triffid_Hunter
3,001 26 05/19/2011 04:38PM
Last Post by Triffid_Hunter

Compiling Teacup Firmware, Maybe is a stupid problem...

by alfalover
2,011 18 05/19/2011 04:53AM
Last Post by alfalover

MiXley: Teacup on a ATmega32U4 Attachments

by Michielh
1,564 5 05/03/2011 07:34AM
Last Post by Michielh

Why high frequency PWM?

by bryanandaimee
2,930 9 04/20/2011 03:40PM
Last Post by BenJackson

Experimental Gen3 Mendel firmware

by CodeRage
1,688 12 04/12/2011 08:12PM
Last Post by Triffid_Hunter

Teacup firmware M114 position reporting

by BenJackson
984 3 04/05/2011 01:15PM
Last Post by BenJackson

TeaCup EndStops - Why?

by Architect
1,753 15 04/04/2011 04:22PM
Last Post by Architect

How to fit Teacup Firmware on a 168 chip?

by edictor
1,501 11 03/02/2011 11:36PM
Last Post by Traumflug

Teacup on a Repstrap

by Arvin
1,109 7 02/26/2011 02:15PM
Last Post by Triffid_Hunter

Teacup Firmware: Thermistor not reading? Maybe pin definition? <solved>

by jgilmore
1,701 12 02/14/2011 05:24PM
Last Post by jgilmore

Teacup Firmware: Enhancements to func.sh

by jgilmore
948 1 02/10/2011 09:40AM
Last Post by jgilmore

Have I got Teacup Firmware config.h wrong?

by emt
2,010 13 02/02/2011 08:18AM
Last Post by emt

Amforth and RepRap

by aka47
3,960 30 01/14/2011 01:09AM
Last Post by keith causey

Temperature management code

by dazed.dnc
1,443 16 12/13/2010 11:09AM
Last Post by nophead

FiveD on ARM -- HBox electronics, R2C2 board

by casainho
1,581 1 12/11/2010 06:27AM
Last Post by casainho

slave processor

by dissidence
1,461 6 10/17/2010 08:03PM
Last Post by aka47

Adding heated build plate Gcodes to firmware

by dazed.dnc
1,773 6 09/22/2010 01:39PM
Last Post by dazed.dnc

Firmware communication protocol : Streaming vs Packets   (Pages: 1 2)

by BeagleFury
6,581 37 08/09/2010 08:26PM
Last Post by Triffid_Hunter

RepRap Software for RepRap Hardware   (Pages: 1 2 3)

by aka47
8,292 73 05/24/2010 11:49AM
Last Post by aka47